Die-cut pure PTFE gaskets: FLUORTON
Properties
The FLUORTON virgin PTFE gasket is plastic and smooth to the touch, used in various
industries where non-stick properties and good chemical inertia are required.
The FLUORTON is practically a solid state lubricant and guarantees a very lo...
- VERY LOW FRICTION COEFFICIENT
- CHEMICALLY INERT
- RESISTANT TO LOW AND HIGH TEMPERATURE
- RESISTANT TO WEATHER CONDITIONS AND UV LIGHT
- LOW HEAT TRANSFER COEFFICIENT
- EXCELLENT DIELECTRIC FEATURES
Technical data
| Temperature max: | +260 °C |
| Temperature min: | -200 °C |
| Pressure max: | 80 bar |
| pH: | **** |
| Density ASTM D792: | **** |
| Hardness - Shore ASTM D2240: | **** |
| Tensile strength ISO 12086 - ISO 527: | **** |
| Elongation at break ISO 12086 - ISO 527: | **** |
| Compression strength with deformation 1% ASTM D695: | **** |
| Under load deformation at room temp. after 24 h / 13,7 N/mm2 ASTM D621: | **** |
| Permanent deformation as above after 24 h of rest at room temp. ASTM D621: | **** |
| Under load deformation at 260 °C after 24 h / 41 N/mm2 ASTM D621: | **** |
| Permanent deformation as above after 24 h of rest ASTM D621: | **** |
| Izod impact ASTM D256: | **** |
| Coefficient of dynamic friction ASTM D1894 - ASTM D3702: | **** |
| Wear K factor ASTM D3702: | **** |
| PV limit: | |
| at 3 m/min (N/mm2 · m/min): | **** |
| at 30 m/min (N/mm2 · m/min): | **** |
| at 300 m/min (N/mm2 · m/min): | **** |
| Coefficient of linear expantion 25-100 °C simil ASTM D696: | **** |
| Dielettric strength (thickness tested 0,5 mm) ASTM D149: | **** |
| Dielectric constant at 60 Hz and 106 Hz ASTM D150: | **** |
| Volume resistivity ASTM D257: | **** |
| Surface resistivity ASTM D257: | **** |